Great blade. For me second best after Darker Speed 90 and I prefer it to PP Moby. Speed is definitely more than even some carbon blades. Great touch. Great feeling. Good Spin and control. Over all I love it. Love it more than any carbon blade. For me it works so well even with Butterfly Rozena.
-
Home
-
Tables
-
Robots
-
Rackets
- Types
- Hardbat Rackets (without sponge)
- Entry Level Rackets - Pips-In w/Sponge
- Entry Level Rackets - Pips-Out w/Sponge
- Intermediate Recreational Rackets
- Advanced Recreational Rackets
- Penhold Recreational Rackets
- Penhold Pro Combos
- Offensive Pro Combos
- Allround Pro Combos
- Defensive Pro Combos
- Outdoor Rackets
- See also
- Balls
-
Blades
-
Rubber
-
Balls
-
Assembly
- Gluing
- Glue
- Gluing Tools
- Side Tape
-
Gear
- Clothing and Shoes
- Shirts
- Women's Shirts
- Men's Shorts
- Women's Shorts
- Skirts
- Socks
- Caps
- Men's Suits
- Women's Suits
- Shoes
- See Also
- Cases
- Bags
- Other Accessories
-
Brands
-
Info
→ Very Fast Blades → Nittaku Miyabi
→ Nittaku Blades → Nittaku Miyabi
Nittaku Miyabi
by Nittaku
The Nittaku Miyabi blade is made with one ply of hinoki wood (Kiso Japanese cypress). It plays fast with a soft feel. Once you experience the feel of this one-ply blade, you will be hooked! Class: OFF+
Material: All Wood
Ply: 1w
Blade Thickness: 9.0mm
Speed: 95
Control: 59
Weight: 85g
Blade Buying Guide - what you need to know when buying a blade.
Compare Blades - blade rating comparison chart.
Blade Weight Variations - Actual blade weight may vary by up to 8g.
Best Price Guarantee
We guarantee to have the lowest prices (shipping included) in the US. Please tell us if you see a lower price.
Reviews of Nittaku Miyabi (8)
Having read about the unique qualities of 1 ply hinoki blades (being very fast when swung aggressively, yet slow and controllable in the short game) I was excited to find a blade for a good price (flash sale for $75), rather than $200 and up like for other brands. The blade is actually much lighter than expected, very balanced and workmanship is flawless. The grain of the wood was very fine and close, so based on other reviews perhaps there is some variance between blades. It is a very soft blade, with very little vibration, yet it is also stiff. I put Gambler Nine Ultra Tack in 2.1mm black on backhand and Friendship 755 in 1mm forehand, as I'm learning to twiddle. The feel at slow speeds, with both rubbers, is very controlled. Inverted pushing is simple, blocking is decent, drives are excellent and brush loops are good though require more effort away from the table than carbon blades. Pips pushing is easy, blocking was a bit awkward, chopping was very natural, and flipping short backspins into topspin was a breeze. There is a lot of dwell time, and the feeling when the ball hits makes you feel connected. If you want a lot of touch and control at slow speeds and a lot of speed and spin at high speeds, you will not be disappointed!
my first blade after played with pre made bat. this one ply hinoki is so good to learn to control the ball and its not heavy in my opinion. soft feeling, good dwelling time, yet still fast enough to hit the ball. works very well when i used fastarc G1 and P1 rubbers.
I was going to buy the Darker Speed 90 but just can't layout $300 for it. So I decided to get the next best one ply hinoki instead. I think I made the right choice.
My Miyabi weigh in a little on the heavy side at 91g. This is an almost perfect setup with FH T64 1.7 and BH Donic Slice 40 1.5. Total weight is amazingly low at 172g. BH flick/loop is a bit hard due to thin rubber, need to adjust blade angle. Same goes for blocking and pushing. However BH chop is great, very precise and ball control is excellent. Wish the D Slice 40 was a little bit thicker. FH loop needs a little getting use to and adjust blade angle but once get used to the new angle looping is a breeze. Hitting is what this blade is made for, both near table and mid-range. Love it...crisp, accurate, fast. The feel and explosive sound of the ball hitting on the blade is un-equal, even better than my friend's Speed 90. Perhaps FH blocking is the weak point of this blade, I do need to explore this area more. All in all, it's a pleasure playing with this combo.
My Miyabi weigh in a little on the heavy side at 91g. This is an almost perfect setup with FH T64 1.7 and BH Donic Slice 40 1.5. Total weight is amazingly low at 172g. BH flick/loop is a bit hard due to thin rubber, need to adjust blade angle. Same goes for blocking and pushing. However BH chop is great, very precise and ball control is excellent. Wish the D Slice 40 was a little bit thicker. FH loop needs a little getting use to and adjust blade angle but once get used to the new angle looping is a breeze. Hitting is what this blade is made for, both near table and mid-range. Love it...crisp, accurate, fast. The feel and explosive sound of the ball hitting on the blade is un-equal, even better than my friend's Speed 90. Perhaps FH blocking is the weak point of this blade, I do need to explore this area more. All in all, it's a pleasure playing with this combo.
This is my third one ply blade. Its 9mm thick and at 95 grams weighs less than the Yinhe J1 and Sanwei H10. With 729 cream transcend 1.5mm both sides the overall playing weight is 180gms which is a fairly average set up. Flared handle is good but not as comfortable for my big hands so overgrip added at the neck.
The quality of the wood is open to question as the grain (spacing of the growing rings) become progressively wider across the face of the blade, so in theory the feel of the blade and vibration should differ from one end of the blade to the other. This is disappointing as Nittaku made in Japan is often seen as a sign of superior quality. The Sanwei has consistent grain across the whole blade and is half the cost.
However the feeling of this blade is superb, speed is medium fast. It does not have the vibration of the Sanwei, and its weight is similar to my match playing set up and this makes the transition to this one ply much easier.
Everyone who has tried it has been captivated by the feel of this blade. It puts a warm feeling and a smile on your face.. sheer pleasure!
This blade can do everything except pushing at the table which is rather awkward probably because of the adjustment needed to take into account the thickness of the blade.
Because of the wide spacing of the growing rings this is not top notch Kiso Hinoki as mentioned in the introduction above. This has either been grown in a warmer area than Kiso, or it is made from cheaper cuts rather than the best quarter sawn examples. It is definitely not 400 years old but I believe it is Japanese hinoki because of the size to weight ratio. The Sanwei H10 is likely to have been made from Taiwanese cypress which is heavier.
Of course top quality Hinoki costs a multiple of the asking price of the Miyabi. Now if I could get one made to measure .......
The quality of the wood is open to question as the grain (spacing of the growing rings) become progressively wider across the face of the blade, so in theory the feel of the blade and vibration should differ from one end of the blade to the other. This is disappointing as Nittaku made in Japan is often seen as a sign of superior quality. The Sanwei has consistent grain across the whole blade and is half the cost.
However the feeling of this blade is superb, speed is medium fast. It does not have the vibration of the Sanwei, and its weight is similar to my match playing set up and this makes the transition to this one ply much easier.
Everyone who has tried it has been captivated by the feel of this blade. It puts a warm feeling and a smile on your face.. sheer pleasure!
This blade can do everything except pushing at the table which is rather awkward probably because of the adjustment needed to take into account the thickness of the blade.
Because of the wide spacing of the growing rings this is not top notch Kiso Hinoki as mentioned in the introduction above. This has either been grown in a warmer area than Kiso, or it is made from cheaper cuts rather than the best quarter sawn examples. It is definitely not 400 years old but I believe it is Japanese hinoki because of the size to weight ratio. The Sanwei H10 is likely to have been made from Taiwanese cypress which is heavier.
Of course top quality Hinoki costs a multiple of the asking price of the Miyabi. Now if I could get one made to measure .......
Nittaku Blades
Table Tennis Blades
All items are in stock unless otherwise stated. All prices are in USD.
If you need help or advice please contact us. We are happy to help!