Return to Topic Index |
recommend upgrades to Butterfly Kodo? (4)
recommend upgrades to Butterfly Kodo?
by Tony 18 years ago
by Tony 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Gark 18 years ago
by Gark 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Tony 18 years ago
by Tony 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Gark 18 years ago
by Gark 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Tony 18 years ago
by Tony 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Gark 18 years ago
by Gark 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Tony 18 years ago
by Tony 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Tony 18 years ago
by Tony 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Gark 18 years ago
by Gark 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Tony 18 years ago
by Tony 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by ZoranV 18 years ago
by ZoranV 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by cole 18 years ago
by cole 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Gark 18 years ago
by Gark 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by ZoranV 18 years ago
by ZoranV 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Tony 18 years ago
by Tony 18 years ago
Re: recommend upgrades to Butterfly Kodo?
by Gark 18 years ago
by Gark 18 years ago
The following message (subject: Re: recommend upgrades to Butterfly Kodo?) was posted by Gark, on 2/6/2006 4:51:20 AM:
Oh i see, I would recommend a ALL+ or and OFF- blade to start with (anything more MAY contribute to even more misses), then try chinese rubbers. This is because the tackiness on the topsheet will help generate the extra spin in your serves (greatly helps underspin serves) and also helps a forward attacking motion. So something like: instinct plus, with higher transcend I'm not sure what to recommend on your backhand, but if you liked the jap/euro rubber feeling, then try something like 729FXEL (supersoft). You may notice that i recommended chinese equipment, this is because most(not all) euro/jap companys offer equipment at much higher prices. Also you should ask Cole on cole_ely@hotmail.com for a second opinion (great guy, gives great advice). |